HELLO BROTHERS AND SISTERS ARE YOU INTERESTED IN JOINING THE ILLUMINATI BROTHERHOOD IF YES FOLLOW UP THE ILLUMINATI TEAMS ON VIA EMAIL ADDRESS OR WHAT'S APP !!! @ + 2348066163720 !!!
 [email protected] VISITORS ARE WELCOME !!!!

won't run on any setting over 10 minutes without getting E1 code. Very disappointed!

Used heater total of 3 days and now it will not turn on. The power is on in back power light on front panel shows but nothing else will displaying and no way to turn unit on manually or with remote. Total running time for combined 3 days 4 hours. Biggest piece of junk I have ever had the misfortune of purchasing.

Power on back of in It but none to controls

Bought this heater Model SGH-W6-WIQ in November 2016. Been just fine. Now plug in & turn on and the breaker blows. There is nothing else on this circut... Any suggestions???

My LifeSmart Infrared Heater won't turn on at all. It only displays an "E2" error code when it's plugged in and turned on.

Turn temp up and throws e1 just bought in december

Bought A Lifesmart 1500 - 6 element infared heater from Home Depot for under $100. Heard loud pop upon plugging in - figured an element blew but it started up. Got the E-1 code after 4 minutes operation. Unit went back to Home Depot. Stupidly ordered a newer model from Amazon just over $100 with free shipping. What a mistake.....This one starts up and blows lukewarm air and never goes over the starting 72 temp. On hold for support for over 45 minutes listening to horrible & loud music designed to make you hang up. Prompted to leave a message every 2 minutes. Finally left a detailed message with my phone number but 4 days later I'm still waiting for their response. Amazon will now have to pay to pick up Lifesmarts defective merchandise. Buyer beware!!!!! This is NOT A REPUTABLE COMPANY. Retailers - you are losing money selling their defective merchandise.

Purchased Lifesmart heater Dec 2013 two months later started getting E1 code. Also, cord gets extremely hot to the touch and when you touch the prong parts it is hot enough to burn you!!! Come on complaint board don't wait till houses are burnt down before you force them to order a recall and get the warnings out about potential fire hazards!!! Cords are NOT sufficient for these heaters!!!

this heater is really bad--runs a little while on high then get a e1 error and it shuts off--looked for a number to call to get it fixed and i can't find one-i ran it on low and it doesn't shut off, but u don't get enough heat out of it unless it's 60% outside--really bad heater

I have one of these heaters as well. Biggest complaint is that when the heater is set on the High setting and runs for a period of time the power cord gets extremely hot almost to the point of burning to the touch. This does not happen on the low setting, electrician said it was a faulty power cord that cannot support the wattage of the higher setting. Additionally heater worked well for several months then has just recently started giving the E1 error. I haven't checked the filter yet but will do so then try running it again, however from these posts I'm not sure it is going to make much difference.